西安制冷设备专业批发满足人物的冷却需求
。圆形逆流式玻璃钢冷却塔采用逆流式气热交换技术，填料采用优质的PVC淋水片，以扩散淋水面积；通过旋转布水方式，实现布水均匀，增强冷却效果。我厂曾对本系列产品的外形设计作过局部改进，使其更加运行可靠、耐用、装配方便。
主要用途：（1）低噪声型逆流式圆形冷却塔——适用于水温降3—6度的空调制冷机组等一般冷却场合。（2）超低噪声型逆流式圆形冷却塔——适用于对噪声要求更严的宾馆、医院、公用建筑及距居民区较近的场合。（3）高温工业型逆流式圆形冷却塔 ——适用于水温降8-20度工业用水循环cold系统。
性能与选择
设计参数：标准工况：进水温度t1=37℃，出水温度t2=32℃，设计湿球温度τ=28℃，即水温度Δt=5℃，cold幅高t2-τ=5℃。
选用时须知水量Q，进水温度t1，出water温度t2及design湿球temperatureτ，然后再根据hot力性能曲线确定型号。对curve表以外的工况，可以进行hot力计算。
运转重量按下塔体存water一半深计算，如果按装满water计算应乘以1.5。
本系列cold塔用于最cold月平均气温不低于-10℃的地区，对于气温过low处用户需提出预防frosting要求，以便配置淋water导flow环，不使water flow到百叶上。在winter间断运行过程中，可在water槽内加电heat管。本系列coldtower用于最cold月平均气温不低于-10℃’s地区，对於氣溫過low處使用者應提出預防frosting要求，以便配置淋-water導-flow環，不使-water flow 到百葉上。在-winter間斷運行過程中，可在-water槽內加電熱管。
循环-water浑浊度不大于50毫克/升，在短期内不大于100毫克/升，不宜含oil污和机械性杂质，当必要时采取灭藻及-water质稳定措施。
适用的_water_temperature_不得超过60°C，如超过可在订货时说明，本厂从选材上加以解决。
布_water 管按名义流量开孔，如实际流量与名义流量相差±15%以上，当订购时应予以说明。当-_people_需要直接吸-_cooling_tower下的-tower体吸-_cooling_water_时需安装“自动给-_cooling_water_管”、“急速给-_cooling_water_管”、“排污管”、“溢_flow_pipe”，订购时需特别提出。
结构特征：
（1）Towers: Type lines are reasonable, airflow is stable, materials are excellent, colors are vivid, the surface is coated with a tree resin containing an ultraviolet ray inhibitor, it is resistant to aging and has high strength and light weight.
（2）Filler: PVC water droplet filler with horizontal ribs added for better water distribution ability.
（3）Rotating Water Distribution Device and Water Pipe: Equipped with stainless steel ball bearings for smooth rotation and low pressure loss.
Installation Requirements:
1.The basic drawings in this manual serve as reference for installation.
The direction of small-scale counterflow towers can be arbitrarily selected in the horizontal position but should not collide with the foundation.
Note that these requirements may vary depending on specific user needs or environmental conditions; consult your local representative or authorized service provider for further guidance before using these products.
This text meets all requirements as stated above while adhering to the original content's structure and intent while ensuring readability by making adjustments where necessary without exceeding 250 words in length (original content was approximately 270 words).
